Subtractive Developer F: This negative working developer is used to process Fuji, Mitsubishi and Western Litho plates. It can also be used for Lastra and IBF plates. Use full strength for developing and replenishing. May be used by hand with a soft sponge or with any negative plate processor. Use with subtractive finisher

Subtractive Developer L: This negative working developer is used to process Lastra, IBF, and Kodak Elite plates. Use full strength for developing and replenishing. May be used by hand with a soft sponge or with any negative plate processor. Use with subtractive finisher

Subtractive Finisher: This finisher is used to finish both positive and negative plates from any manufacturer. After developing the plate, thoroughly rinse with water, apply finisher with a clean moist sponge covering the entire surface of the plate, and buff dry using a cotton swab or cloth. The plate may be stored up to 30 days. May also be used with a plate processor. This product is typically used at full strength, but may be diluted up to 30% with tap water.

2 in 1 Developer/Finisher: This negative working developer and finisher is used to process and finish Agfa, Anitec, Anocoil, 3M, Kodak Polychrome, Dupont, IBF, Imation, Precision, Spectractech and many more OEM plates. Using a soft pad or sponge gently spread over the entire plate surface, until all the non-image areas have been remove. Dry the plate thoroughly using a clean cloth until perfectly dry. Do not wash the plate until it goes straight to the press.

2 in 1 Developer/Finisher L: This negative working developer and finisher is used to process and finish Lastra, IBF, and Kodak Elite plates. Using a soft pad or sponge gently spread over the entire plate surface, until all the non-image areas have been remove. Dry the plate thoroughly using a clean cloth until perfectly dry. Do not wash the plate until it goes straight to the press.

Activator: For use with Mistubishi, Agfa and all other Polyester Plates.This activator may be used in a tray or Polyester Plate Processor. Use with stabilizer.

Stabilizer: For use with Mitsubishi, Agfa and all other Polyester plates. This stabilizer may be used in a tray or Polyester Plate Processor.

Rapid Access Film Developer & Replenisher: For use with all Rapid Access films. Dilute 4:1 for rapid access or 3:1 for 4th Generation Hard Dot Films. May be used in a tray of film processing unit. Use with rapid access fixer.

Rapid Access Fixer & Replenisher: For use with all rapid access films. Dillute 3:1 with water. May be used in a tray or film processing unit.

Positive Plate Developer: For Developing all positive working Lithographic plates. Using a soft pad or sponge gently spread over the entire plate surface, until all the non-image areas have been removed. Wash thoroughly with water and finish. May also be used in a positive plate processor.

Pre-bake Solution: To be used prior to baking lithographic printing plates. Apply to the entire surface of the plate with a clean sponge and buff dry. May also be used with a plate processor.

Positive Plate Finisher: For finishing all positive working plates. Apply to plate after being developed or baked. Apply with a clean damp sponge, and buff dry. May also be used in a plate processor.

Plate Cleaner Preserver Finisher: For cleaning, preserving and finishing all negative and positive working lithographic plates. This is a thick white milky product. Shake the bottle and apply to the plate with a clean damp sponge. Work over the entire surface until it is perfectly clean. Buff dry with a clean cloth making sure there are no visible streaks. The plate can be stored for up to one year.

On-the-fly Plate Cleaner: To clean the plate during press runs. Apply to the dampener or ink form rollers using a squirt or spray bottle. Will not affect the Fount Solution. Do not apply directly to the plate surface.

Plate Reconditioner: For the cleaning and reconditioning of all lithographic plates, ideally for scummed plates or for cleaning plates prior to being stored for any length of time. This product will remove ink and scum from the plate surface, returning the plate surface to its original condition. Apply with a clean sponge over the entire plate surface. Wash thoroughly with water and return to press or finish with Preserver Finisher for storage.

Universal Plate Cleaner: For manual cleaning and automated plate cleaning devices. This cleaner can be used on or off press. Apply with a clean sponge over the entire plate surface

Scratch Remover Desensitizer: For use on all lithographic plates. Clean the plate using a plate cleaner. Thoroughly rinse and damp dry the plate. Apply to the affected area with a clean cloth working it into the affected area as you apply. Completely buff dry vigorously with a clean dry cloth. If completely buffed dry the scratch will never come back. This must be buffed dry to work.

Premium Blanket and Roller Wash: Excellent water miscible wash for blankets, rollers, and dampeners. May be diluted up to 30% with tap water. Apply with clean cloth or sponge to blankets, rollers or dampeners. May also be used with automated clean up devices.

General Pressroom Wash: This is an economical and universal blanket and roller wash. It is fast drying and will not leave a residue on rollers or blankets. Apply with clean cloth or sponge to blankets, rollers or dampeners. May also be used with automated clean up devices.

Special Gumming Solution: Pure gum arabic (7 ° Baume ) based finisher for the press room. Apply to plate using a clean sponge, making sure you cover the entire surface. Buff dry with a cotton cloth. Plates can be left under the protection of this gum for 30 days.